Core Highlight
Pressure drop ≤4kPa, fan energy consumption reduced by 20%-30%, standard size 100×100×100mm, easy installation.
Product Introduction
Yuncheng Standard Honeycomb Activated Carbon YC-MH features a honeycomb structure design with extremely low pressure drop and excellent adsorption performance. It offers low pressure drop, high strength, and moisture resistance, making it the preferred choice for high-flow, low-concentration waste gas treatment.
Technical Specifications
| Item | Specification |
| Iodine Value | 600 / 700 / 800 mg/g |
| Axial Compressive Strength | ≥0.9 MPa |
| Pressure Drop | ≤4 kPa |
| Operating Temperature | ≤400℃ |
| Common Size | 100×100×100mm / 100×100×50mm / 100×50×50mm / 50×50×50mm |
| Pore Size | 1.5mm / 3mm / 5mm |
| Corresponding Cell Density | 1.5mm≈200 cells/in², 3mm≈100 cells/in², 5mm≈50 cells/in² |
| CTC | 50% / 60% / 70% |
| Benzene Adsorption | 20-49% |
| Packaging | 18 pcs/carton, 36 pcs/carton, 72 pcs/carton |
Selection Guide
Please confirm the following in order when ordering:
1,Iodine Value First
2,Size Second
3,Pore Size Third
If you are unsure how to choose, please contact us. We will recommend the most suitable specification based on your airflow and concentration.
Application Notes
| Parameter | Recommended Range | Potential Issues |
| Iodine Value | Based on gas concentration & emission requirements (600/700/800) | Insufficient iodine value affects adsorption |
| Pore Size | Based on airflow & dust content (1.5/3/5mm) | Improper pore size affects pressure drop or causes clogging |
| Axial Compressive Strength | ≥0.9 MPa | Low strength causes breakage |
| Pressure Drop | ≤4 kPa | High pressure drop increases fan energy consumption |
| Operating Temperature | ≤400℃ | Over-temperature causes carbon ignition |
Why Choose Us
Premium Raw Material
High iodine value activated carbon powder ensures high adsorption capacity.
Fine Raw Material Processing
60-mesh sieve filtration removes impurities, making finer powder.
Uniform Mixing
Small manual fine processing, mixing 30-40 minutes, uniform material, less clogging.
Extra Filtration Step
Filtration after rough refining makes the mud finer.
Careful Drying
Air dry 3 days first, then drying room 6 days with temperature gradually rising from 30°C to 60°C. Production cycle about 10 days, high strength, low moisture.
Precise Dimensions
98-99mm, outer wall 0.8-1mm, inner wall 0.55mm, national standard, shrinkage does not affect installation.
ISO Certified
ISO9001 Quality Management, ISO14001 Environmental Management, ISO45001 Occupational Health & Safety Management system certified.
Contact Us
📞 Speak to an Expert: +86 19103974693
✉️ Email Your Specs: [email protected]
